313 GC Hydraulic Excavator

.
🔍
🔍
🔍
🔍
🔍

 

Description
Technical Specifications
Benefits and Features
Equipment
360 View

The Cat® 313 GC excavator matches its performance to your job. An updated, larger cab keeps you comfortable all shift long. Combined with fuel-saving features and longer maintenance intervals, the 313 GC provides reliability at a low-cost-per-hour.

Engine
Net Power - ISO 9249 73 HP
Engine Model Cat C3.6
Engine Power - ISO 14396 74 HP
Engine Power - ISO 14396 (DIN) 75 hp (metric)
Net Power - ISO 9249 (DIN) 74 hp (metric)
Bore 4 in
Stroke 5 in
Displacement 220 in³
Biodiesel Capability Up to B20¹
Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Weights
Operating Weight 30400 lb
Working Ranges & Forces
Maximum Digging Depth 19.8 ft
Boom Reach 4.65 m (15'3")
Stick Reach R3.0 m (9'8")
Bucket GD 0.53 m³ (0.69 yd³)
Maximum Reach at Ground Level 28.4 ft
Maximum Cutting Height 28.9 ft
Maximum Loading Height 21 ft
Minimum Loading Height 5.2 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 19.2 ft
Maximum Vertical Wall Digging Depth 17 ft
Minimum Working Equipment Radius 8.4 ft
Bucket Digging Force - ISO 22180 lbf
Stick Digging Force - ISO 13330 lbf
Hydraulic System
Main System - Maximum Flow 247 L/min (65 gal/min)
Maximum Pressure - Equipment 5075 psi
Maximum Pressure - Travel 5075 psi
Maximum Pressure - Swing 3770 psi
Swing Mechanism
Swing Speed 11.5 r/min
Maximum Swing Torque 25888 ft·lbf
Service Refill Capacities
Fuel Tank Capacity 68.2 gal (US)
Cooling System 4 gal (US)
Engine Oil 2.1 gal (US)
Final Drive - Each 0.8 gal (US)
Hydraulic System - Including Tank 22.5 gal (US)
Hydraulic Tank 18.5 gal (US)
Dimensions
Boom Reach 4.65 m (15'3")
Stick Reach R3.0 m (9'8")
Bucket GD 0.53 m³ (0.69 yd³)
Shipping Height - Top of Cab 9.2 ft
Handrail Height 9.2 ft
Shipping Length 25.5 ft
Shipping Length - with Blade 26.4 ft
Tail Swing Radius 7.1 ft
Counterweight Clearance 3 ft
Ground Clearance 1.4 ft
Track Length 12.3 ft
Length to Center of Rollers 9.9 ft
Track Gauge 6.5 ft
Transport Width 8.1 ft
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

Latest Features

        

  • Cab Monitor Improvements.
        

  1. Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
  2.     

  3. Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
  4.     

  5. A notification center keeps important information visible to the operator, and displays messages without shrinking the camera view.
  6.     

  7. Color coded notifications set critical messages apart from the rest.
  8.     

  9. Use the in-monitor QR code to learn about machine and technology features through a full suite of "how-to" videos.
        

  • The standard integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 07E

Fuel Saving Performance Matched to the Job

        

  • Use up to 10% less fuel than the 313F GC to keep you moving and productive on the jobsite.
  •     

  • Easily work on slopes and move around the jobsite with 10% more swing torque.
  •     

  • The advanced hydraulic system provides the optimum balance of power and efficiency while providing the control needed for precise digging requirements.
  •     

  • Smart mode meets your power needs by automatically matching engine and hydraulic power to digging conditions.
  •     

  • Get higher production in demanding applications, easier penetration into piles, and faster cycle times with Cat® Advansys™ bucket tips. Quickly change tips with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
  •     

  • Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
  •     

  • The Cat C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  •     

  • Product Link™ comes standard so you can remotely monitor machine health, location, hours, and fuel consumption on-demand through the VisionLink® online interface.

Lower Maintenance Costs

        

  • Expect up to 25% less maintenances costs than the 313F GC.
  •     

  • Quickly check and service your machine with all daily maintenance points accessible from ground level.
  •     

  • Check the engine oil level quickly and safely from the ground. Fill and check engine oil on top of the machine with a conveniently located second dipstick.
  •     

  • The hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval – 50% longer than previous filter designs.
  •     

  • The engine does not require diesel exhaust fluid (DEF).
  •     

  • Track your machine’s filter life and maintenance intervals on the in-cab monitor.
  •     

  • Boost productivity with proactive service reminders. The Integrated Vehicle Health Management system alerts the operator with step-by-step service guidance along with parts needed so you don't experience any unnecessary downtime.
  •     

  • S·O·SSM ports are located at ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis. 

Work in Comfort

        

  • Increase operator productivity with a large, comfortable cab.
  •     

  • The cab has a wide seat that adjusts for operators of all sizes.
  •     

  • Advanced viscous mounts reduce cab vibration.
  •     

  • Control the excavator comfortably with easy-to-reach controls all located in front of you.
  •     

  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
  •     

  • Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

Reliable, Whatever the Environment

        

  • Don’t let the temperature stop you from working. The 313 GC has a standard high-ambient temperature capability of 52° C (125° F) without de-rate and cold-start capability of -18° C (0° F).
  •     

  • Auto warm-up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
  •     

  • Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
  •     

  • The track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
  •     

  • The sloped track frame prevents mud and debris accumulation, helping reduce the risk of track damage.

Simple to Operate

        

  • Start the engine with the push of a button, a Bluetooth key fob, or the unique Operator ID function.
  •     

  • Program your preferred power mode and joystick settings using your operator ID. The excavator will automatically remember your selections.
  •     

  • Navigate quickly on the standard high-resolution touchscreen monitor or with the aid of the jog dial control.
  •     

  • The Cat PL161 attachment locator is a Bluetooth device designed to let users know where their attachments are across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The PL161 integrates easily into VisionLink® for full fleet management of machines and attachments from one smartphone or tablet dashboard to view location and tracking details.
  •     

  • Save more time and energy with the available work tool recognition feature. A simple shake of the attached tool confirms its identity and ensures all the attachment settings (pressure, flow, and dimensions) are correct so you can work quickly and efficiently.
  •     

  • Not sure how a function works or how to maintain your machine? Simply access the operator’s manual through the touch screen monitor.
  •     

  • Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format. Productivity applications are displayed in  grid-view to read on-the-go, and touchscreen navigation is programmed to make sure job performance continues without any hold ups.

Safety

        

  • Access all daily maintenance points from ground level – no need for you to climb on top of the machine.
  •     

  • The standard ROPS cab meets ISO 12117-2:2008 requirements.
  •     

  • The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
  •     

  • A ground-level shut-off switch stops all fuel to the engine and shuts down the machine when activated.
  •     

  • A rearview and right-side-view camera are standard, increasing safety and visibility.
  •     

  • The service platform design provides easy, safe, and quick access to the upper service platform. Prevent slipping with the anti-skid punch plate on the platform steps.
  •     

  • Optional boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose power.
  •     

  • Brightly colored seatbelts allow easy recognition of properly utilized safety restraints.
  •     

  • Enhance jobsite safety. Add a swing alarm to alert people when you're rotating from trench to stockpile and back again.
  •     

  • Make service work easier and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.

TAKE THE GUESSWORK OUT OF MANAGING YOUR EQUIPMENT

        

  • VisionLink® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer.*Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
  •     

  • VisionLink® Productivity gathers and summarizes machine telematics and jobsite data from all your equipment regardless of the manufacture.* View actionable information such as idle time, fuel burn, location, payload, load counts, total cycles, and more to improve machine efficiency, productivity, and utilization. Access data anywhere via a mobile, tablet, or desktop device - on or off the jobsite.
  •     

  • Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.

*Data field availability can vary by equipment manufacturer.

Sustainability

        

  • The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  •     

  • The 313 GC emits up to 10% less CO2 than the previous 313F GC*.
  •     

  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels*** up to: 20% biodiesel FAME (fatty acid methyl ester)** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations" (SEBU6250) for details.
  •     

  • Auto Engine Speed Control reduces unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  •     

  • Cat Scheduled Oil Sampling (S·O·S℠) Services helps reveal excessive wear, contaminated fluids or other "unseen" issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine's operation and maintenance manual for more information.
  •     

  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  •     

  • Cat VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
  •     

  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
  •     

  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
  •     

  • Cat® Reman parts are a sustainable choice. New Cat parts are designed with the potential to have more than one life, so Cat Reman parts are truly remanufactured — not just repaired, rebuilt or reconditioned. Because the process ensures the latest design changes are incorporated into Cat Reman parts, you get like new quality and outstanding performance at lower cost.

*All comparisons to 313F GC. Productivity, fuel and CO2 emissions vary by application. CO2 emissions calculations based on a reference work cycle using 2.2 U.S. gallons per hour of #2 U.S. diesel fuel based. Applies IPCC2006 methodology using U.S. EPA Emissions Hub emission factors. Includes DEF (diesel exhaust fluid) related CO2. Fuel measurements are at 15ºC. Estimated average fuel consumption improvements are based on tests or Product Link® data where available. Productivity improvements are based on test data.
** Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
*** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Standard Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 4.65 m (15'3") Reach boom
  • Cab
    • Rollover protective structure (ROPS)
    • Comfort Cab: mechanical suspension seat, 203 mm (8") touch screen monitor
  • Cat Technologies
    • VisionLink®
    • Remote Flash
  • Electrical System
    • Maintenance free battery
    • LED chassis light, left-side boom light, cab lights
    • Programmable time-delay LED working lights
  • Engine
    • Cat C3.6 single turbo diesel engine
    • Auto engine speed control
    • Auto engine shutdown
    • 52°C (125°F) high-ambient cooling capacity without de-rate
    • -18°C (0°F) cold start capability
    • Electric fuel priming pump
    • Variable speed fan
    • Single fuel filtration system
    • Double element air filter with integrated precleaner
    • Biodiesel capability up to B20
  • Hydraulic System
    • Boom and stick regeneration circuit
    • Auto hydraulic warm up
    • Auto two speed travel
    • Electric main control valve
    • Boom and stick drift reduction valve
  • Safety And Security
    • Rear and right-side-view cameras
    • Hydraulic lock out lever
    • Ground-level engine shutoff switch
    • Service platform with anti-skid plate and countersunk bolts
    • Signaling/warning horn
    • Auto Hammer Stop
  • Service And Maintenance
    • Grouped engine oil and fuel filters
    • Side entry to service platform
    • Ground-level engine oil dipstick
    • Sampling ports for Scheduled Oil Sampling (S·O·S)
    • Lockable disconnect switch
    • Integrated vehicle health management system
  • Undercarriage And Structures
    • Grease lubricated track link
    • ISO 15818 tie down points on base frame
    • 2470 kg (5,445 lb) counterweight

Optional Equipment:

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 2.5 m (8'2") Reach stick
    • 2.8 m (9'2") Reach stick
    • 2.8 m (9'2") Thumb Ready stick
    • 3.0 m (9'10") Reach stick
  • Cat Technologies
    • VisionLink Productivity
  • Electrical System
    • LED right-side boom light
    • 360° lighting
  • Hydraulic System
    • Boom and stick lowering check valves
    • Medium-pressure line
    • High-pressure line
    • Quick coupler line
  • Safety And Security
    • Swing alarm
    • Inspection lighting
  • Undercarriage And Structures
    • 500 mm (20") triple grouser shoes
    • 500 mm (20") triple grouser shoes with rubber pad
    • 600 mm (24") rubber track shoes
    • 600 mm (24") triple grouser shoes
    • 700 mm (28") triple grouser shoes
    • 770 mm (30") triple grouser shoes
    • 2500 mm (8'2") blade
    • 2600 mm (8'6") blade
    • 2700 mm (8'10") blade


Related Equipment


EASY TO UPDATE. WORK LIGHTS USE PROMO CODE LIGHTS30

X