299D2 XHP Compact Track Loader

🔍
🔍
🔍

 

Description
Technical Specifications
Equipment

The Cat® 299D2 XHP Compact Track Loader, with its powerful engine, high output hydraulic system, high lift forces, vertical lift design and torsion axle suspension, provides the maximum performance for work tool productivity, digging, truck loading and material handling in a wide range of underfoot conditions and applications.

Engine
Engine Model Cat C3.8 DIT (turbo)
Net Power 106 HP
Gross Power - SAE J1995 110 HP
Net Power - SAE 1349 106 HP
Displacement 232 in³
Bore 3.9 in
Stroke 4.7 in
Peak Torque - 1,500 rpm - SAE J1995 276 ft·lbf
Net Power - ISO 9249 107 HP
Operating Specifications
Rated Operating Capacities - 50% Tipping Load 4725 lb
Ground Contact Area 2184 in²
Ground Pressure 5.3 psi
Tipping Load 9450 lb
Breakout Force - Tilt Cylinder 7270 lb
Breakout Force - Lift Cylinder 6162 lb
Rated Operating Capacity with Optional Counterweight 4975 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacities - 35% Tipping Load 3308 lb
Weights
Operating Weight 11608 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Service Refill Capacities
Cooling System 4.1 gal (US)
Engine Crankcase 3.5 gal (US)
Fuel Tank 32.2 gal (US)
Hydraulic System 14.5 gal (US)
Hydraulic Tank 10.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
Dimensions
Length - Track on Ground 69.6 in
Overall Length - Track 89.4 in
Height - Top of Cab 83.6 in
Ground Clearance 9.6 in
Departure Angle 33°
Maximum Dump Angle 54°
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle 25°
Bucket Pin Height - Carry Position 7.1 in
Bucket Pin Height - Maximum Lift 126.3 in
Bucket Pin Reach - Maximum Lift 19.4 in
Clearance at Maximum Lift and Dump 94.5 in
Length - With Bucket on Ground 154.7 in
Length - Without Bucket 125.5 in
Maximum Overall Height 158.7 in
Maximum Reach - With Arms Parallel to Ground 51.9 in
Rack Back Angle - Maximum Height 81°
Reach - Maximum Lift/Dump 33.6 in
Turning Radius from Center - Bucket (racked) 91.1 in
Turning Radius from Center - Coupler 58.1 in
Turning Radius from Center - Machine Rear 74 in
Vehicle Width (400 mm/15.7 in tracks) 76 in
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
FOPS Level II ISO 3449:2005 Level II
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab** 104 dB(A)
Hydraulic System
Hydraulic Flow - XHP - Hydraulic Power (Calculated) 94 HP
Hydraulic Flow - XHP - Maximum Loader Hydraulic Flow* 40 gal/min
Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure 4061 psi
Note *When equipped with Cat 400 Series work tools.
Standard Flow Mode - Hydraulic Power - Calculated 44 HP
Standard Flow Mode - Loader Hydraulic Flow 23 gal/min
Standard Flow Mode - Loader Hydraulic Pressure 3335 psi
Power Train
Travel Speed - Forward or Reverse - One Speed 5.2 mile/h
Travel Speed - Forward or Reverse - Two Speed 8.4 mile/h

Standard Equipment:

  • Electrical
    • 12 volt Electrical System
    • 100 ampere Alternator
    • Ignition Key Start/Stop Switch
    • Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light
    • Backup Alarm
    • Heavy Duty Battery, 1,000 CCA, with Battery Disconnect
  • Operator Environment
    • Gauges: Fuel Level, DEF Level, Hour Meter
    • Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System
    • High Back Cloth Seat with Air Suspension, Heated with Recline and Lumbar Support and Fully Adjustable Seat Mounted Controls
    • Fold In Ergonomic Contoured Armrest
    • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
    • ROPS Cab, Enclosed, Tilt Up
    • FOPS, Level I
    • Top, Rear and Side Windows
    • Headliner, Deluxe
    • Floor Mat
    • Interior Rearview Mirror
    • 12 volt Electric Socket
    • Horn
    • Hand (Dial) and Foot Throttle, Electronic with Decel Feature
    • Advanced Display: Full Color, 127 mm (5 in) LCD Screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Drive Response, and Creep Control; Rearview Camera Included
    • Storage Compartment with Netting
  • Power Train
    • Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final/Stage IV Emission Standards
    • Air Cleaner, Dual Element, Radial Seal
    • S·O·SSM Sampling Valve, Hydraulic Oil
    • Filters, Cartridge-type, Hydraulic
    • Filters, Cartridge-type, Fuel and Water Separator
    • Radiator/Hydraulic Oil Cooler (side-by-side)
    • Spring Applied, Hydraulically Released, Wet Multi Disc Parking Brakes
    • Hydrostatic Transmission, Two Speed Travel
    • Suspension – Independent Torsion Axles (4)
    • Speed Sensitive Ride Control
  • Other
    • Engine Enclosure, Lockable
    • Extended Life Antifreeze, –37° C (–34° F)
    • Machine Tie Down Points (6)
    • Support, Lift Arm
    • Hydraulic Oil Level Sight Gauge
    • Radiator Coolant Level Sight Gauge
    • Radiator, Expansion Bottle
    • Cat ToughGuard Hose
    • Auxiliary, Hydraulics, Continuous Flow
    • Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
    • Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
    • Electrical Outlet, Beacon
    • Belly Pan Cleanout
    • Variable Speed Demand Fan
    • Steel Imbed Rubber Track – 400 mm (15.7 in) with Triple Flange Idlers (front and rear)
    • Product Link PL240, Cellular
  • Mandatory Equipment
    • Quick Coupler, Mechanical or Powered
    • Seat Belt, 50 mm (2 in) or 75 mm (3 in)
    • PERFORMANCE PACKAGE:
      • Performance Package H3: XHP Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, Electronic Snubbing (Raise and Lower)
    • COMFORT PACKAGE:
      • Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, Air Ride Seat (High Back and Heated) and Door (Glass or Polycarbonate)

Optional Equipment:

  • Optional Equipment
    • Beacon, Rotating
    • Engine Block Heater – 120V
    • Oil, Hydraulic, Cold Operation
    • Paint, Custom
    • Variable Speed Demand Fan with Reversing Functionality
    • External Counterweights
    • Product Link PL641, Cellular
    • Bluetooth Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
    • Full Steel Track (Sealed and Lubricated – SALT) with Triple Grouser Shoes; One Speed Travel Only